Arco Tradizionale

Prior to putting your arco tradizionale together, very carefully read the owner’s guidebook. If you check out some directions that are not clear there must be a consumer solution # on the guidelines that you can contact us to clarify any type of complication.

Arco Tradizionale

Parts Inspection

Carefully remove your arco tradizionale from package and remove all the plastic covering and also throw out. Your owner’s manual must have a packaging listing of all the parts that come with your bow. Suit the components on the listing to what is in the shipping box. If you are missing any type of components, or it is evident a component is damaged, instantly call customer support.

Bow Evaluation

Begin by examining your new arco tradizionale thoroughly. Keep an eye out for any type of cracks or abnormalities. Ensure the strings and cable televisions have not come off the webcam tracks and also are fixed to the arm or legs. Examine all the bolts as well as screws and also make certain they are limited. Analyze the rubber dampers, cam modules and also inner web cams.

Setting the Draw Weight

To establish the draw weight you will certainly need to turn the bolts on the arm or legs of your arco tradizionale. To enhance the weight transform the screws clockwise. To reduce the draw weight transform the bolts counter-clockwise. See to it you turn each screw the very same amount.

Establish the Tiller

Your next action is to take a look at the tiller. The string-to-riser distance need to coincide for both limbs. If the range differs by roughly 1/8-inch or a lot more adjust the bolts on the arm or legs in the other instructions till the range is fixed. If you have a One-Cam arco tradizionale the tiller has to be determined by tying string from axle to axle and also determining the tiller keeping that string.

Inspecting Camera Orientation

When the bow is not being attracted the alignment marks of the web cam need to be within a strings width of the mark if the string is set in the center or dotted post. Ensure your timing marks are also from base to top.

The Crossbreed Webcam System and also the Draw Stop

Attract your arco tradizionale complete back so the split harness wire get in touches with the draw stop on the bottom cam. Ensure the control cable is calling the level component of the module on the top cam. If required, transform the control wire as well as adjust the leading webcam so the string makes get in touch with on the flat.

Arco Tradizionale

For a bow with a twin cam you check the timing by drawing the bow back, making certain both web cams rollover at the same time. Spin or untwist the cords till this surrender occurs simultaneously.

Arrowhead Rest

Comply with the guidelines in your proprietor’s handbook for setting up the arrow rest. If you have the Posi-Lock function, use this to mount the arrow rest to your arco tradizionale bought from www.arcoricurvo.com. Establish the center shot change on the arrow remainder so it is parallel to the alignment mark. After that making use of the nocking loop and also rest change established the arrow in position alongside the placement mark on the bow window. The arrowhead needs to pass in front of the placing hole on the arrow rest.

Mounting the Sight

Adhere to the instructions in your proprietor’s manual for installing the sight. Secure your arco tradizionale in a vise. Making use of a level established the bow. Inspect the sight to ensure it is level also.

Last Step

Ultimately set up the stabilizer and sling inning accordance with your proprietor’s handbook. Inspect all screws to make sure they are limited. You are currently done preparing your arco tradizionale. Enjoy capturing!